중저압 배관 피팅 플랜지는 주로 탄소강, 주철, 스테인리스강으로 제조됩니다.
탄소강은 일반적인 플랜지 재질로, 내식성, 기계적 특성 및 용접성이 우수하며 고압 및 고온을 견딜 수 있어 중저압 배관 피팅 플랜지의 제조 재료로 자주 사용됩니다. 주철 플랜지는 일반적으로 저압, 저온 및 일반 유체 및 가스 수송 파이프라인 및 장비에 적합합니다. 강도는 상대적으로 낮지만 가격이 저렴하여 일부 저압 프로젝트에 적합합니다.
또한 스테인리스강 플랜지는 중저압 배관 피팅 플랜지 시장에서 일정 점유율을 차지하고 있습니다. 스테인리스강은 내녹성이 우수하며, 특히 내산성 및 내열성이 뛰어나 화학, 제약 등 산업의 파이프라인 시스템에 자주 사용됩니다. 스테인리스강 플랜지의 비용은 더 높지만, 고온, 고압 및 강한 부식성 매체와 같은 특정 환경에서 성능 이점이 부각됩니다.
요약하면, 중저압 배관 피팅 플랜지의 재질 선택은 특정 사용 환경과 엔지니어링 요구 사항에 따라 달라집니다. 각 재질은 서로 다른 성능 특성을 가지므로 실제 조건에 따라 선택해야 합니다. 플랜지 선택 시 재질 외에도 사양, 연결 방식, 밀봉 성능 등의 요소를 고려하여 파이프라인 시스템의 안전하고 안정적이며 효율적인 작동을 보장해야 합니다.
관련 읽을거리
업계 뉴스Whiptail Approval Adds a Sixth Stabroek Development to Guyana's Offshore Buildout
ExxonMobil has received government and regulatory approvals for the Whiptail development, the sixth project on the Stabroek block offshore Guyana. The project targets about 250,000 barrels per day of capacity by end-2027, with $12.7 billion investment. For EPC buyers, this signals continued demand for subsea and topside piping components.
업계 뉴스Rovuma LNG Enters FEED: What Is Confirmed About the Mozambique Development
ExxonMobil and Area 4 co-venturers have entered FEED for the 18 MTA Rovuma LNG project in Mozambique. This article clarifies what is confirmed, what remains unconfirmed, and what EPC buyers should verify before procurement.
업계 뉴스Northern Lights Phase 2 FID Expands CO2 Transport and Storage Chain
Equinor, Shell, and TotalEnergies have taken FID on Northern Lights phase 2, boosting injection capacity to at least 5 Mtpa by 2028. This article explains the expansion scope, procurement implications, and what buyers must verify for CO2 piping systems.