The short answer: ten standards, one crowded date
Ten standards covering fittings, steel tube and pressure piping have moved to new editions, and their effective dates form a staircase rather than a single step. The dates run from 2025-04-01 to 2027-04-01. One step carries four standards at once: GB/T 12459-2025, GB/T 13401-2025, GB/T 20801.1-2025 and GB/T 20801.5-2025 all take effect on 2026-05-01, and all four were published on 2025-10-31. The other six are spread across 2025-04-01, 2025-10-01, 2026-01-01, 2026-02-01 and 2026-03-28. GB/T 34542.5-2026, effective 2027-04-01, comes last.
For buyers and designers the useful move is to treat the effective date as the switch and record the edition in the contract, the purchase order and the technical agreement. That one habit removes most of the which-edition-applies discussion later, at goods-in inspection and at drawing sign-off.
| Standard | Subject | Published | Effective | Status |
|---|---|---|---|---|
| GB/T 17395-2024 | Steel tube dimensions, shape, weight and tolerances | 2024-09-29 | 2025-04-01 | In force |
| GB/T 3091-2025 | Welded steel pipe for low-pressure liquid delivery | 2025-03-28 | 2025-10-01 | In force |
| GB/T 9948-2025 | Seamless steel tube for petrochemical and chemical plants | 2025-06-30 | 2026-01-01 | In force |
| GB/T 14976-2025 | Seamless stainless steel tube for fluid conveyance | 2025-08-01 | 2026-02-01 | In force |
| DL/T 695-2025 | Steel butt-welding fittings for power stations | 2025-09-28 | 2026-03-28 | In force |
| GB/T 12459-2025 | Steel butt-welding fittings: types and parameters | 2025-10-31 | 2026-05-01 | In force |
| GB/T 13401-2025 | Steel butt-welding fittings: technical specification | 2025-10-31 | 2026-05-01 | In force |
| GB/T 20801.1-2025 | Pressure piping code, Part 1: industrial piping | 2025-10-31 | 2026-05-01 | In force |
| GB/T 20801.5-2025 | Pressure piping code, Part 5: hydrogen piping | 2025-10-31 | 2026-05-01 | In force |
| GB/T 34542.5-2026 | Hydrogen storage and transport systems, Part 5 | 2026-09-28 | 2027-04-01 | Upcoming |
Subjects in the table are rendered in English for readability; the registered titles are in Chinese and the standard numbers should always be quoted as printed above.
Read the table down the effective-date column, not the publication year. GB/T 17395-2024 carries a 2024 number, which makes it easy to skip as an older document, yet its effective date is 2025-04-01, so it belongs to the 2025 group. The status column follows each registry entry, and individual records can be checked on the standards index.
2025: two standards, one for tube dimensions and one for welded tube
Only two effective dates fall inside 2025. GB/T 17395-2024 was published on 2024-09-29 and took effect on 2025-04-01, leaving about six months of transition. It governs the dimensional baseline, dimensions, shape, weight and permitted deviations, so both tube orders and fitting orders that use tube as input will touch it. GB/T 3091-2025 was published on 2025-03-28 and took effect on 2025-10-01, a same-year cycle and a tighter one.
Neither standard addresses fittings directly, but both sit upstream of them. A tube enquiry that says only that the goods are to meet the national standard leaves the supplier free to work to whichever edition of the dimensional tolerances it holds; stating the year closes that gap at almost no cost. Product scope is set out on the seamless steel pipes pages.
The first four months of 2026: two seamless tube standards and one fittings standard
Three standards take effect in sequence as 2026 opens. GB/T 9948-2025 applies from 2026-01-01, GB/T 14976-2025 from 2026-02-01, and DL/T 695-2025 from 2026-03-28. Each covers its own ground: petrochemical and chemical plants, stainless tube for fluid conveyance, and butt-welding fittings for power stations.
Their supersession lists are the part worth reading closely. GB/T 9948-2025 replaces four earlier standards in one move: GB/T 9948-2013, GB/T 6479-2013, GB/T 24592-2009 and GB/T 33167-2016. GB/T 14976-2025 replaces three: GB/T 14976-2012, GB/T 38810-2020 and GB/T 40317-2021. DL/T 695-2025 replaces DL/T 695-2014. The longer the list, the more scattered the surviving old references will be in legacy technical agreements and drawing schedules, and petrochemical and power-plant packages are where they are easiest to miss.
2026-05-01: four standards on one day
The four sharing 2026-05-01 cover both the fittings side and the piping-design side. GB/T 12459-2025 and GB/T 13401-2025 divide the work in their titles: one fixes types and parameters, the other the technical specification. GB/T 20801.1-2025 and GB/T 20801.5-2025 are two parts of the same pressure piping code, the fifth part addressing hydrogen service on its own.
A shared date helps buyers. GB/T 12459 and GB/T 13401 usually appear together in one fittings agreement, so an aligned effective date removes the window in which one document has moved and the other has not. The same holds on the design side: GB/T 20801.1 and GB/T 20801.5 can be aligned within one revision of a design file. Dimension and parameter references for the products are on the seamless butt-welding pipe fittings pages.
The common failure at order stage is not ignorance of the new edition but an incomplete reference: GB/T 12459 with the year left blank. No amount of detail on size, dimensions and inspection requirements compensates for an edition that was never pinned down, and the question resurfaces at acceptance.
Four standards with a published supersession list
Four of the ten carry supersession information that can be stated without qualification.
| New edition | Replaces |
|---|---|
| GB/T 17395-2024 | GB/T 17395-2008, GB/T 21835-2008 |
| GB/T 9948-2025 | GB/T 9948-2013, GB/T 6479-2013, GB/T 24592-2009, GB/T 33167-2016 |
| GB/T 14976-2025 | GB/T 14976-2012, GB/T 38810-2020, GB/T 40317-2021 |
| DL/T 695-2025 | DL/T 695-2014 |
For the other six this article draws no conclusion; their supersession position has to be read from the foreword of the standard text itself. One point needs to be explicit. A new edition taking effect does not prohibit the previous one. None of these is a mandatory standard, and which edition a project uses is set by the contract and the design documents. The effective date gives a default citation for new contracts and new drawings; it does not void documents already issued under an earlier edition, and contracts placed against the earlier edition continue to run on that edition.
What procurement and design should do
- Write the full year. Purchase orders, technical agreements and drawing schedules should read GB/T 12459-2025, not GB/T 12459.
- Split the switch points. DL/T 695-2025 on 2026-03-28 and the four standards on 2026-05-01 are more than a month apart, so power-plant packages and general piping packages can be checked in two passes instead of one combined sweep.
- Use the supersession table as a search list. Run the four new numbers against existing agreements to find superseded references still in place, with GB/T 6479-2013 and GB/T 24592-2009 the usual survivors in petrochemical files.
- Flag 2027-04-01 early. GB/T 34542.5-2026 was published on 2026-09-28 and takes effect on 2027-04-01; hydrogen projects can note the intended edition now and confirm it as the date approaches.
Edition control is simple in principle and messy in practice, because a single technical agreement often cites several edition years at once. Fix the effective dates and the supersession lists, and the remaining technical differences can be compared clause by clause against the published text. To check cited editions and fitting parameters against a specific project, send the list through the enquiry page.
Sources
- GB/T 12459-2025《钢制对焊管件 类型与参数》详情页
- GB/T 13401-2025《钢制对焊管件 技术规范》详情页
- GB/T 20801.1-2025《压力管道规范 第1部分:工业管道》详情页
- GB/T 20801.5-2025《压力管道规范 第5部分:氢用管道》详情页
- GB/T 9948-2025《石化和化工装置用无缝钢管》详情页
- GB/T 14976-2025《输送流体用不锈钢无缝钢管》详情页
- GB/T 17395-2024《钢管尺寸、外形、重量及允许偏差》详情页
- GB/T 3091-2025《低压流体输送用焊接钢管》详情页
- GB/T 34542.5-2026《氢气储存输送系统 第5部分:氢气输送系统技术要求》详情页
- DL/T 695-2025《电站钢制对焊管件》详情页
4시간 내 견적
이 기사에서 다룬 제품
견적이 필요하신가요? 사양을 보내주시면 4영업시간 내에 답변드립니다.
관련 읽을거리
표준ISO 9712 NDT Personnel Certification: Buyer Verification Guide
Learn how to verify ISO 9712 NDT personnel certification for pipe fittings and flanges. Understand the difference between ISO 9712, ASNT central certification, and employer-based SNT-TC-1A, and get practical procurement checks.
표준ISO 9606-1 Welder Qualification: What EPC Buyers Must Verify
ISO 9606-1 welder qualification proves an operator's skill within defined limits. Learn what records to check, how it differs from WPS/PQR, and key procurement risks.
표준ISO 15614-1 Welding Procedure Qualification: Purpose and Limits
Understand the role of ISO 15614-1 in qualifying welding procedures for steel and nickel alloys, and learn what buyers must verify before accepting a WPS/PQR.



